OM1A series industry handles, Hall or potentiometer type single axis spring automatic reset,potentiometer type with direction switch, the installment pitch of hole size is 24mm*36mm.
Mainly used in industrial remote control, construction machinery, agricultural machinery and transportation machinery
Product characteristic:
Spring automatic reset, fingertip type operation.
Single axis front and back direction operation; with direction switch’s potentiometer mode;
could without contact with single or double Hall mode, no direction switch.
Could according to the requirement select the output voltage range.
Application scope:
This series products are mainly used in industrial remote control,
construction machinery, agricultural machinery and transportation machinery.
| Product selection:(other different selection ) | |
| OM1A - ooo | |
| 1. 2. | |
| Sub-item selection instructions: | |
| 1.Product series number | OM1A series industry handles, Hall or potentiometer type single axis spring automatic reset,potentiometer type with direction switch, the installment pitch of hole size is 24mm*36mm. Mainly used in industrial remote control, construction machinery, agricultural machinery and transportation machinery |
| 2.Output signal | P041= potentiometer type, input voltage less than 36Vdc, with 4K Ω center-tapped potentiometer,0% ~100%Vdc voltage output P052= potentiometer type, input voltage less than 36Vdc, with 5K Ω center-tapped potentiometer, P053= potentiometer type, input voltage less than 36Vdc, with 5K Ω center-tapped potentiometer, H51= Single hall type, the input voltage 10%~ 5Vdc, 50% ~ 90%Vdc voltage output H52= Single hall type, the input voltage 0% ~5Vdc, 50% ~ 100%Vdc voltage output H53= Single hall type, the input voltage 25% ~5Vdc, 50% ~ 75%Vdc voltage output 2H51= Double hall type, the input voltage 10% ~ 5Vdc, 50% ~ 90%Vdc voltage output 2H52= Double hall type, the input voltage 0%~ 5Vdc, 50% ~ 100%Vdc voltage output 2H53= Double hall type, the input voltage 25% ~ 5Vdc, 50% ~ 75%Vdc voltage output |
Technical parameter:
| Mechanical parameter: | |
| Swing angle: | ± 30° |
| Service life: | Is bigger than 5,000,000 times (potentiometer type), Is bigger than 10,000,000 times (Hall type) |
| Operation strength: | 3.5N (biggest) |
| Limit strength: | 50N |
| Weight: | 45g |
| Electrical parameter: | |
| Potentiometer type: | |
| Power supply voltage: | < 36Vdc |
| Total resistance value: | 4K Ω 5K Ω; |
| Electrical angle: | ± 28 ° |
| The median position voltage (relative power supply voltage): | 48% ~ 52% |
| The median position dead zone angle: | ± 2.5 ° |
| Potentiometer loading maximum voltage: | DC32V |
| Potentiometer allows the maximum power consumption (25): | 0.25W |
| Direction switch: | |
| load capacity: | 10mA 30Vdc (resistive load) |
| Outset angle: | ± 3 ° ± 5 ° |
| Hall type: | |
| Power supply voltage: | 5Vdc |
| The total current: | <10mA |
| Linear tolerance: | ± 3% |
| Power supply voltage: | DC5.0V ± 10% |
| Load resistance: | >10K Ω |
| Environmental parameter: | |
| Operating temperature: | -20 °C ~ +70 °C |
| Storage temperature: | -40 °C ~ +85 °C |
1-axis industrial joysticks Drawing:
Send Message
Related Products
